Welcome to RC Hyderabad. Store for technology professionals and hobby enthusiast.
The Radiolink CrossFlight Controller V1.1 is a high-performance, next-generation flight controller designed for professional and hobbyist drones, RC airplanes, helicopters, rovers, and boats. As an upgrade over the earlier V1.0 version, this model introduces enhanced flight algorithms, sensor fusion, and broader compatibility, making it one of the most versatile controllers in the market.
Radiolink CrossFlight V1.1 includes major improvements in:
Firmware stability
Flight performance
Sensor accuracy
Hardware capabilities
It supports RTK, Neopixel LEDs, gripper functionality, and delivers more reliable multirotor and fixed-wing control compared to the older V1.0 version.
Main Processor: HC32F4A0PITB – High-speed MCU for real-time control
Gyroscope/Stabilizer: ICM42670 – 6-axis IMU for stable flight
Barometer: LPS22HB – High-resolution air pressure sensor
Compass: VCM5883 – 3-axis magnetometer for precise navigation
PWM Outputs: 10 channels for motor or servo control
MAVLink UART Ports: 2 (No CTS/RTS required)
USB Port: 1 × Type-C
GPS Port: 1 × UART/I2C combo for external GPS modules
RC Input Compatibility: Accepts both PPM and SBUS signals
Neopixel LED: Supported
Gripper Functionality: Supported
RTK Support: Yes – ideal for precision drone missions
Input Voltage Range: 2S–12S LiPo (7.4V to 50.4V)
Maximum Input Current: 90A
USB Voltage Input: 5V ± 0.3V
Servo Voltage: Not supplied internally – requires external BEC
Power Module Output:
Output Voltage: 5.1V
BEC Current: 2.5A
ESC Input Current (single): 20A
Supported Platforms
This controller supports a wide range of RC models:
Multirotors: Tri-copter to Octa-copter (3–8 motors)
Fixed-Wing Airplanes
VTOL / Helicopters
Ground Vehicles: RC Cars and Rovers
Watercraft: Boats and Amphibious vehicles
Difference Between Version 1 and Version 1.1
| Feature | CrossFlight V1.0 | CrossFlight V1.1 |
|---|---|---|
| Firmware | Basic | Improved algorithms & stability |
| RTK Support | ❌ No | ✅ Yes |
| Neopixel LED Support | ❌ Limited | ✅ Full support |
| Gripper Support | ❌ No | ✅ Yes |
| MAVLink UART | 1 | 2 Ports |
| Barometer & Compass | Standard | Enhanced (LPS22HB + VCM5883) |
| GPS Port | UART only | UART + I2C combo |
| Performance | Good | Excellent |
This is custom tab. You can add custom tab as an attribute for entire products, or for each categories. You can add CMS content such as sizing guide or videos to enhance product detail.