0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Flight Controller

Set Descending Direction

   

Items 1 to 12 of 47 total

  1. 1
  2. 2
  3. 3
  4. 4
Set Descending Direction

   

Items 1 to 12 of 47 total

  1. 1
  2. 2
  3. 3
  4. 4

Flight Controller in India

Flight Controller is the brain of a multirotor. They control the movement of a multirotor. Flight controller is a small electronic circuit board. The function of flight controller India is to direct the speed (RPM) of each motor in response to input. A signal from the multirotor user to move forward is input into the flight controler and that move the motors.


Types of flight controllers


There are various types of flight controllers. Simple type to advance. This depends of the application. Some flight controllers india are just meant for hovering and some advance contrllers have functions like altitude hold, retrun to launch, failsave etc.. To start with you need to buy a board that is easy to fly and configure.
Examples of Flight controller

KK2 Flight Control board


KK2 flight controller is a flight control board used for multirotors. Examples are tricopter, quadcopter, hexacopter etc. This takes signals from gyroscope then passess the signal to esc which controls the motion of a electric motor. This is the main work of the kk2 flight controller Inda.This KK2 flight controller India uses the signals from the transmitter and then passes to the controlboard. This then controls the throttle, aileron, elevator, rudder and others.
 

APM 2.6 flight controller (Ardu Pilot)

APM 2.6 Flight controller is an opensource autopilot system which has won prestigious awards in competition. This is an advance flight controller used for stabilizing the multirotor. This will allow user to turn any fixed or multirotor or a car, boat, rover etc into a fully autonomous vehicle which can perform programmed GPS missions with waypoints.APM 2.6 comes with onboard compass and seperate compass.APM 2.6 board requires no assembly, and is ready for firmware upgrade. There are quite few models of APM 2.6. Side pin, top pin and mini APM. All perform the same functions.

Pixhawk Flight controller

Pixhawk flight controller is an advanced autopilot designed by PX team. Again this is an open hardware project originally which was manufactured by 3D Robotics. But now this is also manufactured by Chinese firms. These are Pixhawk clones and works the same and of good quality. Pixhawk flight controller can be programmed by an interface which can be installed on a pc generally a mini usb. You can also fix RasberriPi to this pixhawk. Pixhawk. You can connect various types of devices and controls to this like Sonar, ultrasound, gps, compass and many more functions. This pixhawk can be flown via the transmitter or the software itself. Transmitter is not compulsory. This Pixhawk is favorite for engineering students and professionals.

Naze32 or Skyline32

This is yet another advance and popular flight control systems. These are used in small to medium size multirotor. Naze32 supports rc planes, tricopter, quads and hexa. This is also open pilot source. Software for this is cleanflight and baseflight. This is smaller in size and easily fits in the aircraft. As this is developed by open source sofware there are growing community of developers constantly improving its performance. As with other flight controllers Naze32 also accepts inputs from transmitter then passes to the gyroscope and then which controls the motos via the esc.

CC3D Flight Controller for small size drones

CC3D flight controller is now days used widely specially for ARF,  RTF and small size drones. This is an open pilot sysem and supports various aerial vehicles like plane, helicopter, quadcopter and hexacopter. This is small in size and easy to setup. It fits well in 200 to 300 size racers and fpv vehicles. Other flight controllers like Naze32, Skyline32 and Flip32 are all based on CC3D. One of the cheaper price and stable flight control system

Naza Flight Controller

Naza flight controller brought to you by DJI. They are the leaders in flight stabilization technology. These flight congtrollers are ready to use out of the box. They are dominating the multirotor industry by there good standards. Though they are little expensive but they are of good quality and performance. There are various models by DJI. They are Naza M and Naza H and A2. They can be used right out of the box. User interface / software is easy to use and configure. Generally Naza is used by professionals and hobby enthusiast who are into aerial photography, video graphy and cinemetography.

KK Multicopter V5.5 Flight Controller

This is one of the basic flight controller used mostly by students. 

Tarot Flight Controller

 This is the latest flight controller by Tarot. They are famous in multirotor frames and kits. They are also manufacturing gimbal and helicopters. This Torot controller comes with alumunium casing, GPS and all other electronic items.