Balsa Trainer Plane (Laser cut Parts)
This is a laser cut parts of Sky Trainer. Wing span is 1 meter and fuselage lengthh is 70CM. Build of balsa and aeroply.
Quality parts. Best for people who wants to learn rc flying. But it is always recommended to learn rc flying via simulator then fly this plane.
What is included in the kit
1. Balsa and aero ply parts of wings
2. Balsa and aero play parts of fuselage
What is required to build this model?
1. CA glue like TufBond, Quick Fix which bonds in seconds
2. You also need 2 meter of monokote or covering film or coloured tape
3. Motor (capable of pulling 500 grams) 2212 (1400kv with 8 inch prop)
4. 20 to 30 A esc
5. Battery (3S 1500mah to 2200mah)
6. 6 to 8 inch propeller depending on motor
This is custom tab. You can add custom tab as an attribute for entire products, or for each categories. You can add CMS content such as sizing guide or videos to enhance product detail.